Adept T2 Pendant freezes

Adept SmartController CX, assistance, configuration, etc

Adept T2 Pendant freezes

Postby rotekopler » Sun May 31, 2015 12:07 am

Hi,

My client complains about a problem that his T2 Pendant freezes/stuck in randomly times while the machine work, and he cant do anything with it until he shutoff the machine.

Does anyone here dealt with this problem?
rotekopler
 
Posts: 27
Joined: Sun Mar 01, 2015 11:56 pm

Re: Adept T2 Pendant freezes

Postby Guenter Grass » Sun May 31, 2015 11:52 pm

Hi rotekopler,

can you ask your customer which firmware version is running on the T2 pendant? If it is older than 2.0.0.8 please ask him to update.

Here the update
T2_2.0.0.8.zip
T2 Pendant Firmware 2.0.0.8
(268.37 KiB) Downloaded 865 times

The update procedure is described in the T2 pendant manual on page 41+. Here the manual T2 Pendant Manual
T2.pdf
(2.25 MiB) Downloaded 883 times
.

Regards
Günter
Guenter Grass
 
Posts: 189
Joined: Thu Oct 16, 2008 4:34 am

Re: Adept T2 Pendant freezes

Postby rotekopler » Tue Jun 02, 2015 10:49 pm

Hi Guenter Grass,

is the 2.0.0.8 is the latest CX pendant version?
rotekopler
 
Posts: 27
Joined: Sun Mar 01, 2015 11:56 pm

Re: Adept T2 Pendant freezes

Postby Guenter Grass » Mon Jun 08, 2015 3:10 am

Hi,

it is the last one for the T2 pendant I'm aware of.

Regards
Günter
Guenter Grass
 
Posts: 189
Joined: Thu Oct 16, 2008 4:34 am


Return to SmartController CX Robot Control

Who is online

Users browsing this forum: No registered users and 1 guest