Sending info from camera to the robot

Sending info from camera to the robot

Postby rotekopler » Thu Mar 12, 2015 12:41 am

hello,

does it possible to send data to a robot from a camera using the TCP\IP instead of the rs232?
rotekopler
 
Posts: 27
Joined: Sun Mar 01, 2015 11:56 pm

Re: Sending info from camera to the robot

Postby apexmotion » Mon Mar 23, 2015 9:56 pm

Yes. I do this from a Cognex Insight camera by opening up a server socket on the Adept controller (I believe there is an example in the AdeptNet documentation called tcp_server). Cognex then has functions for writing output to an IP address and port. Not sure what brand of camera you are using...
apexmotion
 
Posts: 8
Joined: Tue Dec 09, 2008 8:45 am

Re: Sending info from camera to the robot

Postby rwilkus » Fri Apr 24, 2015 9:20 am

Apexmotion, Do you happen to have a project with this implementation that you could share?
rwilkus
 
Posts: 2
Joined: Fri Apr 24, 2015 9:16 am


Return to AdeptSight

Who is online

Users browsing this forum: No registered users and 1 guest

cron