Error -3019

Error -3019

Postby Crush4size » Wed Oct 13, 2010 5:15 am

Just starting system up, get "Error -3019: *ePLC Connect start-up error* Code 42"
I found the meaning in users guide, "42 The V+ extensions license is not installed and is required to execute the vision commands"
I am not executing and vision commands to the best of my knowledge.
I am using the PLC example code from "http://www.adept.com/ftp/Download-Library/ePLC-Examples/ePLC_Connect_2_Example_No_Vision.zip"

Any ideas??
Crush4size
 
Posts: 12
Joined: Wed Jul 21, 2010 12:38 pm

Re: Error -3019

Postby Crush4size » Thu Oct 14, 2010 6:11 am

Since no one else will post, here is the answer:
1 – Code 42 means that “the ePLC Connect Application license is not installed.” The manual has the descriptions for Codes 2 and 42 reversed.
2 – Based on 1 above, we need to get you the License for ePLC.
Crush4size
 
Posts: 12
Joined: Wed Jul 21, 2010 12:38 pm


Return to ePLC Connect Robot Control

Who is online

Users browsing this forum: No registered users and 1 guest