How to Save the program in V+ 11.4

A1, XL1, XL3, MV Cobra, and A6 Robots

Moderator: MikeM

How to Save the program in V+ 11.4

Postby heyz1985 » Sat May 20, 2017 7:43 am

Hello all,
I am a new for the V+ program ,need your help ,thanks.
Such as some program has run in robot a MV10 controller ,then found some problem in this program ,after editing the program called test.pg in V+ system (blue monitor Screen), when used the storep test.pg= test,always alarm error ,how to save the edited program ? thanks.
heyz1985
 
Posts: 6
Joined: Fri Apr 21, 2017 1:52 am

Re: How to Save the program in V+ 11.4

Postby brianch » Sat May 20, 2017 9:23 am

It would help if you said what error you were getting.
Possibly the problem is *Program already exists*. In that case, this might fix it.

FRENAME test.bk1 = test.pg
STOREP test.pg= test

See if that helps.
Here is a link to the Operating System Reference Guide, just in case.
http://www1.adept.com/main/KE/DATA/V%20 ... RGTOC.html
brianch
 
Posts: 14
Joined: Fri Oct 24, 2008 9:06 am

Re: How to Save the program in V+ 11.4

Postby heyz1985 » Sat May 20, 2017 5:29 pm

Thanks.
Here is the error message as below ,also review the attachments .
File or subdirectory name error
Attachments
adept robot.jpg
adept robot.jpg (18.76 KiB) Viewed 6082 times
Last edited by heyz1985 on Sat May 20, 2017 9:04 pm, edited 1 time in total.
heyz1985
 
Posts: 6
Joined: Fri Apr 21, 2017 1:52 am

Re: How to Save the program in V+ 11.4

Postby heyz1985 » Sat May 20, 2017 9:03 pm

brianch wrote:It would help if you said what error you were getting.
Possibly the problem is *Program already exists*. In that case, this might fix it.

FRENAME test.bk1 = test.pg
STOREP test.pg= test

See if that helps.
Here is a link to the Operating System Reference Guide, just in case.
http://www1.adept.com/main/KE/DATA/V%20 ... RGTOC.html




Thanks.
Here is the error message as below ,also review the attachments .
File or subdirectory name error
Attachments
adept robot.jpg
adept robot.jpg (18.76 KiB) Viewed 6081 times
heyz1985
 
Posts: 6
Joined: Fri Apr 21, 2017 1:52 am

Re: How to Save the program in V+ 11.4

Postby brianch » Mon May 22, 2017 7:40 am

One problem is V+ enforces the eight dot three naming convention for local disks so disk_search is way to long of a name for V+. Try calling your program something else that is eight characters or less in length.
brianch
 
Posts: 14
Joined: Fri Oct 24, 2008 9:06 am

Re: How to Save the program in V+ 11.4

Postby heyz1985 » Sat Jun 10, 2017 6:27 am

brianch wrote:One problem is V+ enforces the eight dot three naming convention for local disks so disk_search is way to long of a name for V+. Try calling your program something else that is eight characters or less in length.


Thanks ,Brianch .
the file has already running in the MV controller, If the problem is the file name is too long ,it should be can't running ,now just edit this file in MV controller and can't save it .I don't know why.
heyz1985
 
Posts: 6
Joined: Fri Apr 21, 2017 1:52 am

Re: How to Save the program in V+ 11.4

Postby Guenter Grass » Wed Jun 14, 2017 12:23 am

In V+ file names can't be longer than 8 characters. File extensions can be up 3 characters.

I think you are mixing up program names with file names.

Please check the files on your controller with the command FDIR. It shows all files and subdirectories. You will not find any filename with more than 8 characters.

If you want to see the names of all programs in RAM use the command DIR. Programs can have names up to 15 characters.

Best Regards
Günter
Guenter Grass
 
Posts: 189
Joined: Thu Oct 16, 2008 4:34 am


Return to Adept MV Robots

Who is online

Users browsing this forum: No registered users and 1 guest

cron